Feasibility Study on Resonance Enhanced Drilling Technology

Haige WANG, Siqi LI, Guodong JI, Zhijian HU, Tie YAN, Lijie TAO

Abstract


With the increasing of well depth, the hardness of rock increases which will lead to rock is difficult to be broken. Therefore, Resonance Enhanced Drilling as one of new efficient drilling technologies is presented to improve the efficiency of drilling. The paper is focused on the feasibility study on Resonance Enhanced Drilling, showing the results of the numerical analysis and presenting the implementation methods of the technology. Two kinds of numerical simulations are performed, including modal analysis and harmony analysis of rock and indenter. Also, the excitation frequency is optimized under the actual operation conditions to analyze whether Resonance Enhanced Drilling can be achieved.
Our investigations confirm that both rock and drill bit can be resonant, and there are different resonant frequencies and vibration modes in different orders which are only related to their inherent characteristics. In addition, when the rock drilled is resonant and easily broken, the drill bit will not be destroyed. As a result, the Resonance Enhanced Drilling can be achieved and the optimization of excitation frequency is the resonant frequency of rock drilled.
We suggest that although there are some methods and apparatus have been proposed to achieve resonance drilling technology, more researches are still needed to be conducted to further understand the rock breaking mechanism and promote the realization of the Resonance Enhanced Drilling.


Keywords


Resonance enhanced drilling; Modal analysis; Harmony analysis; Resonant frequency; Implementation methods

Full Text:

PDF

References


Chang, D. Y., & Li, G. S., et al. (2011). The stress field of bottom hole in deep and ultra-deep wells. Acta Petrolei Sinica 32(4), 697-703.

Shen, Z. H., Huang, H. C., & Gao, D. L. (2009). Analysis on new development and development trend of worldwide drilling technology. Journal of China University of Petroleum, 33(4), 64-70.

Liu, H., Zhang, W. H, & Zhu, J. H. (2013). Structural topology optimization and frequency influence analysis under harmonic force excitations. Chinese Journal of Theoretical and Applied Mechanics, 45(4), 588-597.

Batako, A. D., Babitsky, V. I., & Halliwell, N. A. (2004). Modelling of vibro-impact penetration of self- exciting percussive-rotary drill bit. Journal of Sound and Vibration, 271, 209-225.

Zou, Z. G., Wu, B., & He, C. F. (2012). Numerical anslysis of resonance frequency and stiffness ration in weak bonded structures. Engineering Mechanics, 29(6), 32-46.

Ostasevicius, V., & Gaidys, R., et al. (2010). An approach based on tool mode control for surface roughness reduction in high-frequency vibration cutting. Journal of Sound and Vibration, 329, 4866-4879.

Wiercigroch, M., Anton, M. K., & Jerzy, W. (2008). Vibrational energy transfer via modulated impacts for percussive drilling. Journal of Theoretical and applied mechanics, 46(3), 715-726.

Olusegun, K. A., Wiercigroch, M., & Pavlovskaia, E., et al. (2012). Drifting impact oscillator with a new model of the progression phase. Journal of Applied Mechanics, 79.

Pavlovskaia, E., P., Hendry, D. C., & Wiercigroch, M. (2013). Modelling of high frequency vibro-impact drilling. International Journal of Mechanical Sciences, 91, 110-119.

Pavlovskaia, E., & Wiercigroch, M. (2003). Modelling of vibro-impact system driven by beat frequency. International Journal of Mechanical Sciences, 45, 623-641.

Wiercigroch, M. (2010). Resonance enhanced drilling: Method and apparatus. U. S. Patent 12/303728.

Wiercigroch, M. (2012). Resonance enhanced rotary drilling. U. S. Patent 13/496325.

Wiercigroch, M. (2014). Resonance enhanced rotary drilling module. U. S. Patent 13/992199.

Romulo, R. A., & Hans, I. W. (2007). Development of a vibroimpact device for the resonance hammer drilling. Proceedings of the XII International Symposium on Dynamic Problems of Mechanics. Brazil.

Romulo, R. A., & Hans, I. W. (2007). Resonance hammer drilling: Study of a vibro-impact system with embarked force. 19th International Congress of Mechanical Engineering. Brazil.

Yang, W., & Li, L., et al. (2007). Preliminary inquiry of theory of resonance rock breaking. Energy Technology and Management, 4, 7-9.

Li, W., Yan, T., & Bi, X. L. (2012). Apparatus and method for resonance drilling under high frequency pulse jet. C.N. Patent 201110394711. 8.

Li, S. Q., Yan, T., & Li, W., et al. (2015). Modeling of vibration response of rock by harmonic impact. Journal of Natural Gas Science and Engineering, 23, 90-96.

Li, W., Yan, T., & Li, S. Q., et al. (2013). Rock response mechanism and rock breaking test analysis for impact of high frequency vibration drilling tool. Petroleum Drilling Techniques, 41(6), 25-28.

Hall, D. R., Balley, J., & Kudla, M. (2009). Drilling at a resonant frequency. U. S. Patent 11/693838.




DOI: http://dx.doi.org/10.3968/%25x

Refbacks

  • There are currently no refbacks.


Copyright (c) 2016 Siqi LI

Creative Commons License
This work is licensed under a Creative Commons Attribution 4.0 International License.

Share us to:   

Reminder

  • How to do online submission to another Journal?
  • If you have already registered in Journal A, then how can you submit another article to Journal B? It takes two steps to make it happen:

1. Register yourself in Journal B as an Author

  • Find the journal you want to submit to in CATEGORIES, click on “VIEW JOURNAL”, “Online Submissions”, “GO TO LOGIN” and “Edit My Profile”. Check “Author” on the “Edit Profile” page, then “Save”.

2. Submission

  • Go to “User Home”, and click on “Author” under the name of Journal B. You may start a New Submission by clicking on “CLICK HERE”.

We only use three mailboxes as follows to deal with issues about paper acceptance, payment and submission of electronic versions of our journals to databases:
caooc@hotmail.com; aped@cscanada.net; aped@cscanada.org

 Articles published in Advances in Petroleum Exploration and Development are licensed under Creative Commons Attribution 4.0 (CC-BY). 

ADVANCES IN PETROLEUM EXPLORATION AND DEVELOPMENT Editorial Office

Address:1055 Rue Lucien-L'Allier, Unit #772, Montreal, QC H3G 3C4, Canada.

Telephone: 1-514-558 6138
Website: Http://www.cscanada.net
Http://www.cscanada.org
E-mail:office@cscanada.net;  office@cscanada.org

Copyright © 2010 Canadian Research & Development Centre of Sciences and Cultures