Optimizing Economic Number of Transverse Fractures in Horizontal Well: A Systematic Design for Maximum Tight Gas Recovery

Saheed Olawale Olayiwola, Md Motiur Rahman

Abstract


Over the last two decades, the worldwide demand for energy has been met with substantial increase in the oil supply which causes fall in oil price. However, the price of gas has been stabled despite increased demand for gas as a major source of energy. The production from gigantic conventional reservoirs has also reduced which has led to the dependence on current reserves to meet the demand. This increase in demand for gas has led to the increase in activities of research and development with an objective to explore and exploit unconventional resources as an economic and effective cost. Hydraulic fracturing has been proven to be one of the most viable means used to exploit the unconventional resources (tight gas and shale gas formations). Thus, evaluating the performance of the well post-fracturing is necessary to determine the economic viability of the recovery. Inaccurate evaluation of the post-fracturing can lead to either overestimation or underestimation of the design performance particularly from transversely fractured horizontal well. This work includes convergence skin effect that occurs at every intersection of fractures and horizontal section of the well which can account for wide variation of the post treatment in the field from the simulation model. The variation in the skin is a function of fracture conductivity and the number of transverse fractures. This work has developed a hydraulic fracture optimization model which shows the optimal design point, that is, the optimal number of transverse fractures estimated from the economic analysis and gives optimal production rate. This optimal number of transverse fractures estimated from this work is cost effective. This model can lead to an increase in accuracy of optimum design.

Keywords


Transverse fracturing; Skin effect; Horizontal well; Unconventional reservoir; Production performance; Treatment design; Hydraulic fracturing

Full Text:

PDF

References


Economides, M., Oligney, R., & Valko, P. (2002). Unified fractured design: Bridging the gap between theory and practice. Alvin, Texas: Orsa Press.

Yew, C. H. (1997). Mechanics of hydraulic fracturing. Texas: Gulf Publishing Company.

Dusseault, M., & Mclennan, J. (2011). Massive multi-stage hydraulic fracturing: Where are we? American Rock Mechanics Association, Published as a note and as a full paper electronically ARMA site: http://www.armarocks.org/

Holditch, S. A., Ayers, W. B., Lee, W. J., Bickley, J. A., Blasingame, T. A., Mcvay, D. A., … Torres-Verdin, C. (2007). Unconventional gas reservoirs—Tight gas, coal seams and shales. [Report]. Working Document of the NPC Global Oil and Gas, 1-52

Guo, B., & Yu, X. (2008). A simple and accurate mathematical model for predicting productivity of multifractured horizontal wells. SPE 114452, CIPC/SPE Gas Technology Symposium 2008 Joint Conference, Calgary, Alberta, Canada, 16-19 June.

Crosby, D. G., Rahman, M. M., Rahman, M. K., & Rahman, S. S. (2002). Single and multiple transverse fracture initiation from horizontal wells. Journal of Petroleum Science and Engineering, 35(3-4), 191-204.

Lietard, O., Ayoub, J., & Pearson, A. (1996). Hydraulic fracturing of horizontal wells: An update of design and execution guidelines. SPE 37122. International Conference on Horizontal Well Technology, Calgary, Alberta, Canada, 18-20,November 1996.

Wenbin, C., Zhaomin, L., Xialin, Z., Bo, Z., & Qi, Z. (2009). Horizontal well fracturing technology for reservoirs with low permeability. Petroleum Exploration and Development, 36(1), 80-85.

Amin, A. (2012). Well test analysis of infrequent behavior of fractured wells in oil and gas reservoirs. SPE 149887. Middle East Unconventional Gas Conference and Exhibition, Abu Dhabi, 23-25 January.

Soliman, M. Y., East, L. E., & Ansah, J. (2008). Testing and design of hydraulic fractures in tight gas formations. SPE 114988-RU Russian Oil and Gas Technical Conference and Exhibition, Moscow, Russia, 28-30 October.

Sadrpanah, H., Charles, T., & Fulton, J. (2006). Explicit simulation of multiple hydraulic fractures in horizontal wells. SPE 99575. SPE Europec/EAGE Annual Conference and Exhibition, Vienna, Austria,12-15 June, 2006.

Economides, M., & Martin, A. N. (2010). How to decide between horizontal transverse, horizontal longitudinal and vertical fractured completion. SPE 134424. Annual Technical Conference and Exhibition, Florence, Italy, 19-22 September.

Economides, M. J., Demarchos, A. S., & Porcu, M. M. (2006). Transversly multi-fractured horizontal wells: A recipe for success. SPE 102263. Russian Oil and Gas Technical Conference and Exhibition, Moscow, Russia, 3-6 October.

wei, y., & economides, m. j. (2005). transverse Hydraulic Fractures from a Horizontal Well. SPE 94671. Annual Technical Conference and Exhibition, Dallas, Texas, 9-12 October 2005.

Economides, M. J., & Nolte, K. G. (2000). Reservoir Stimulation (3rd ed.). England: John Wiley & Sons Ltd.

Olayiwola, S. O., Rahman, M. M., & Sarma, H. K. (2013). Incorporaiton of convergence skin better estimates productivity index of transversely fractured horizontal well. Paper number 786. Abu Dhabi International Petroleum Exploration and Conference, Abu Dhabi, 10-13 November.

Schulte, W. M. (1986). Production from a fractured well with well inflow limited to part of the fracture height. SPE Production Engineering, 1(5), 333-343.

Gupta B. D, (2010). Mathematical physics. New Delhi: Vikas Publishing House.

Yu, H., & Rahman, M. M. (2012). Multistage transverse fracturing of horizontal well: A new integrated model to develop tight gas sands. SPE 161060. Abu Dhabi International Petroleum Conference and Exhibition, Abu Dhabi,11-14 November 2012.

Mian, M. A. (2011). Project economics and decision analysis: Deterministic models (Vol.1). Pennwell Books, Tulsa, Oklahoma, USA.

Joshi, S. (1988). Augmentation of well productivity with slant and horizontal wells (Includes Associated Papers 24547 and 25308). Journal of Petroleum Technology, 40(6), 729-739.

El Bishlawy, S. H. (1985). Geology and hydrocarbon occurrence of the khuff formation in Abu Dhabi, U.A.E. SPE Paper 13678, Middle East Oil Technical Conference and Exhibition, Bahrain, 11-14 March.

Kreyszig E. (2006). Advanced engineering mathematics. (9th ed.). England: John Wiley & Sons Ltd.




DOI: http://dx.doi.org/10.3968/8882

Refbacks

  • There are currently no refbacks.


Copyright (c) 2017 Saheed Olawale Olayiwola, Motiur Md Rahman

Creative Commons License
This work is licensed under a Creative Commons Attribution 4.0 International License.


Share us to:   


Reminder

  • How to do online submission to another Journal?
  • If you have already registered in Journal A, then how can you submit another article to Journal B? It takes two steps to make it happen:

1. Register yourself in Journal B as an Author

  • Find the journal you want to submit to in CATEGORIES, click on “VIEW JOURNAL”, “Online Submissions”, “GO TO LOGIN” and “Edit My Profile”. Check “Author” on the “Edit Profile” page, then “Save”.

2. Submission

  • Go to “User Home”, and click on “Author” under the name of Journal B. You may start a New Submission by clicking on “CLICK HERE”.

We only use three mailboxes as follows to deal with issues about paper acceptance, payment and submission of electronic versions of our journals to databases:
caooc@hotmail.com; aped@cscanada.net; aped@cscanada.org

 Articles published in Advances in Petroleum Exploration and Development are licensed under Creative Commons Attribution 4.0 (CC-BY)

ADVANCES IN PETROLEUM EXPLORATION AND DEVELOPMENT Editorial Office

Address:1055 Rue Lucien-L'Allier, Unit #772, Montreal, QC H3G 3C4, Canada.

Telephone: 1-514-558 6138
Website: Http://www.cscanada.net
Http://www.cscanada.org
E-mail:office@cscanada.net;  office@cscanada.org

Copyright © 2010 Canadian Research & Development Centre of Sciences and Cultures