Analysis of Thermal Recovery Horizontal Well Drilling Technology in Gudong Nine District

QIN Guanghui, GAO Xiangsen, YAN Zhenlai

Abstract


The thickness of oil reservoir in Gudong nine district is normally 2 to 8 m. The upper parts of this reservoir are fluvial facies. Also, the sand body is a positive rhythm combination, which includes fine sandstones, coarse sandstones, argillaceous siltstones and mudstones from top to bottom. The mine type of oil wells in this area is the thermal recovery horizontal well, which is normally featured in shallow, weak formation (easily to collapse) and unmanageable wellbore trajectory. Considering drill bits, drill stem structure and drilling parameters, the horizontal well drilling technology combines the horizontal well completion technique and MEG drilling fluid system. It has been proved that this technology is especially good at increasing drilling speed and efficiency.
Key words: Horizontal well drilling technology; Weak formation; Wellbore trajectory; MEG drilling fluid; Well completion technique


Keywords


Horizontal well drilling technology; Weak formation; Wellbore trajectory; MEG drilling fluid; Well completion technique

Full Text:

PDF

References


[1] Ezzat, A. M. (1993, April). Horizontal drilling and completion fluids design criteria. Paper presented at Middle East Oil Show, Bahrain.

[2] Hanson, P. M., Trigg, K., Rachal, G., & Zamora, M. (1990, September). Investigation of barite “sag” in weighted drilling fluids in highly deviated wells. Paper presented at the 65th Ann. Techn. Conf. in San Antonio, USA.

[3] Mitchell, R. F. (1986). Frictional forces in helical buckling of tubing. Paper presented at the 59th Annual Technical Conference and Exhibition, Houston, USA.

[4] Wu, J., & Juvkam-Wold, H. C. (1993). Frictional drag analysis for helically buckled pipes in extended reach and horizontal wells. Journal of Energy Resources Technology, 115(3), 196-201.




DOI: http://dx.doi.org/10.3968/6693

Refbacks

  • There are currently no refbacks.


Copyright (c)



Share us to:   

Reminder

  • How to do online submission to another Journal?
  • If you have already registered in Journal A, then how can you submit another article to Journal B? It takes two steps to make it happen:

1. Register yourself in Journal B as an Author

  • Find the journal you want to submit to in CATEGORIES, click on “VIEW JOURNAL”, “Online Submissions”, “GO TO LOGIN” and “Edit My Profile”. Check “Author” on the “Edit Profile” page, then “Save”.

2. Submission

  • Go to “User Home”, and click on “Author” under the name of Journal B. You may start a New Submission by clicking on “CLICK HERE”.

We only use three mailboxes as follows to deal with issues about paper acceptance, payment and submission of electronic versions of our journals to databases:
caooc@hotmail.com; aped@cscanada.net; aped@cscanada.org

 Articles published in Advances in Petroleum Exploration and Development are licensed under Creative Commons Attribution 4.0 (CC-BY). 

ADVANCES IN PETROLEUM EXPLORATION AND DEVELOPMENT Editorial Office

Address:1055 Rue Lucien-L'Allier, Unit #772, Montreal, QC H3G 3C4, Canada.

Telephone: 1-514-558 6138
Website: Http://www.cscanada.net
Http://www.cscanada.org
E-mail:office@cscanada.net;  office@cscanada.org

Copyright © 2010 Canadian Research & Development Centre of Sciences and Cultures