Mechanical Properties of High Temperature Materials: A Review

M. Marichamy, S. Babu

Abstract


This paper has been focused the mechanical properties of high temperature materials, hence they are many applications of HTM such as production, Transport, Energy, Packaging, storage tanks, Industry and tools etc. A review has been carried out to make use of high temperature materials-HTM (such as Steel, copper, titanium, aluminum alloy, etc) mechanical properties.  Towards there are analysis some area such as slow strain rate and hot tensile test. Slow strain rate (SSR) testing is constant slowly extension rate tensile test for excellent search used by research scientist to survey stress erosion cracking. Hot tensile test is using this method we can find out the tensile strength, elongation, yield strength properties of different materials and its alloy, at high temperature. This review paper provides the more important with slow strain rate and tensile test in discussed the different high temperature materials. This survey paper outcome of study the different materials and mechanical properties analysis. The review paper used in the future research work of scholar and scientist. Finally concludes the review.


Keywords


HTM; Slow strain rate; Hot tensile test; Mechanical properties

Full Text:

PDF

References


Berto, F., Cendón, D. A., & Elices, M. (2016). Fracture behavior under torsion of notched round bars made of gray cast iron. Theoretical and Applied Fracture Mechanics, 84, 157-165.

Butcher, C., & Chen, Z. T. (2011). Characterizing void nucleation in a damage-based constitutive model using notched tensile sheet specimens. Theoretical and Applied Fracture Mechanics, 55, 140-147.

Chandan Pandey, M., Mahapatra, M., Kumar, P., & Saini, N. (2017). Effect of strain rate and notch geometry on tensile properties and fracture mechanism of creep strength enhanced ferritic P91 steel. Journal of Nuclear Materials, DOI: 10.1016/j.jnucmat.2017.10.037.

Chen, Y., Rao, A. S., Alexandreanu, B., & Natesan, K. (2014). Slow strain rate tensile tests on irradiated austenitic stainless steels in simulated light water reactor environments. Nuclear Engineering and Design, 269, 38- 44.

Ferguson, C. (2008). Historical introduction to the development of materials science and engineering as a teaching discipline. Liverpool: The Higher Education Academy, UK Centre for Materials Education.

García, T., & Cicero, S. (2015). Application of the Master Curve to ferritic steels in notched conditions. Engineering Failure Analysis, 58, 149-164.

Ghavam, M. H., Morakabati, M., Abbasi, S. M., & Badri, H. (2015). Flow behavior modeling of IMI834 titanium alloy during hot tensile deformation. Nonferrous Met. Soc. China, 25, 748−758.

Ghosh, R., Venugopal, A., Ramesh Narayanan, P., Sharma, S. C., & Venkitakrishnan, P. V. (2017). Environmentally assisted cracking resistance of Al−Cu−Li alloy AA2195 using slow strain rate test in 3.5% NaCl solution. Nonferrous Met. Soc. China, (27), 241−249.

Gnesin, G. G. (2010). Materials scientists: researchers, engineers, inventors. Logos: Kyiv (in Russian).

Jiang, Y., Hu, J. J., & Jiang, Z. H. (2018). Strain rate dependence of tensile strength and ductility of nano and ultrafine grained coppers. Materials Science & Engineering, A 712, 341-349.

Khan, T. (2011, Nov.). High temperature materials: An introduction to Onera’s contribution. Journal Aerospace application, 3.

Kim, J.-S., Larrosa, N. O., Hor, A. J., Kim, Y.-J., & Ainsworth, R. A. (2018). Notch bluntness effects on fracture toughness of a modifiedS690 steel at 1500C. Engineering Fracture Mechanics, 188, 250-267.

Kumar, M. V., & Balasubramanian, V. (2018). Hot tensile properties and constant load stress corrosion cracking test data of autogenous weld joints of super 304HCu stainless steel in boiling MgCl2 solution. Data in Brief, 18, 102-110.

Lin, Y. C., He, M., Chen, M. S., Wen, D. X., & Chen, J. (2016). Effects of initial δ phase (Ni3Nb) on hot tensile deformation behaviors and material constants of Ni-based super alloy. Nonferrous Met. Soc. China, 26, 107−117.

Lokesh Choudhary, R. K., & Raman, S. (2013). “Mechanical integrity of magnesium alloys in a physiological environment: Slow strain rate testing based study. Engineering Fracture Mechanics, 103, 94-102.

Long, B., Dai, Y., & Baluc, N. (2012). Investigation of liquid LBE embrittlement effects on irradiated ferritic/martensitic steels by slow-strain-rate tensile tests. Journal of Nuclear Materials, 431, 85-90.

Matsunaga, H., Yoshikawa, M., Kondo, R., Yamabe, J., & Matsuoka, S. (2015). Slow strain rate tensile and fatigue properties of Cr-Mo and carbon steels in a 115 MPa hydrogen gas atmosphere. International Journal of Hydrogen Energy, 40, 5739-5748.

Saxena, A., Singh Raman, R. K., & Muddle, B. C. (2006). Slow strain rate for vessels and pipes for processing using caustic testing for monitoring cracking of mild steels solutions. International Journal of Pressure Vessels and Piping, 83, 399-404.

Shabalin, L. L. (2014, Dec. 7). Introduction to ultra-high temperature materials. https://www.researchgate.net/publication/269221970

Sui,F. F., & Sandström, R. (2016). Slow strain rate tensile tests on notched specimens of copper. Materials Science& Engineering, A663, 108-115.

Tiedra, P. D., & Martín, Ó (2013). Effect of welding on the stress corrosion cracking behaviour of prior cold worked AISI 316L stainless steel studied by using the slow strain rate test. Materials and Design, 49, 103-109.

Vinoth Kumara, M., Balasubramanianb, V., & Gourav Rao, A. (2016). Hot tensile properties and strain hardening behaviour of Super 304HCu stainless steel. Journal of Materials Research & Technology, 6(2), 116-122.

Xiao, W. C., Wang, B. Y., Wu, Y., & Yang, X. M. (2017). Constitutive modeling of flow behavior and microstructure evolution of AA7075 in hot tensile deformation. Materials Science & Engineering: A, 712, 704-713. https://doi.org/10.1016/j.msea.2017.12.028.

Zhang, H. J., Li, C., Guo, Q. Y., Ma, Z. Q., Huang, Y., Li, H. J., & Liu, Y. C. (2018). Hot tensile behavior of cold-rolled Inconel 718 alloy at 650 °C: The role of δ phase. Materials Science & Engineering: A, 722, 136-146.




DOI: http://dx.doi.org/10.3968/11347

Refbacks

  • There are currently no refbacks.


Copyright (c) 2020 Management Science and Engineering

Creative Commons License
This work is licensed under a Creative Commons Attribution 4.0 International License.

Share us to:   

Reminder

  • How to do online submission to another Journal?
  • If you have already registered in Journal A, then how can you submit another article to Journal B? It takes two steps to make it happen:

1. Register yourself in Journal B as an Author

  • Find the journal you want to submit to in CATEGORIES, click on “VIEW JOURNAL”, “Online Submissions”, “GO TO LOGIN” and “Edit My Profile”. Check “Author” on the “Edit Profile” page, then “Save”.

2. Submission

  • Go to “User Home”, and click on “Author” under the name of Journal B. You may start a New Submission by clicking on “CLICK HERE”.


We only use three mailboxes as follows to deal with issues about paper acceptance, payment and submission of electronic versions of our journals to databases:
caooc@hotmail.com; mse@cscanada.net; mse@cscanada.org

 Articles published in Management Science and Engineering are licensed under Creative Commons Attribution 4.0 (CC-BY).

 MANAGEMENT SCIENCE AND ENGINEERING Editorial Office

Address:1055 Rue Lucien-L'Allier, Unit #772, Montreal, QC H3G 3C4, Canada.

Telephone: 1-514-558 6138
Http://www.cscanada.net Http://www.cscanada.org

Copyright © 2010 Canadian Research & Development Centre of Sciences and Cultures