Designing for Reinforcement Load Sharing

Peter John Stroempl

Abstract


ose design has been neglected as an engineering topic. Hose Technology, 2nd ed., Colin W. Evans, applied science publishers, Essex, England, 1979; has been cited as a design resource. Paper 1 makes a correction to the Evan’s design equation; and this paper extends the solution to indicate how to distribute equally those design loads throughout the reinforcement.
Introduction: This paper documents how to resolve the tensile requirement for the reinforcement based on how many reinforcement ligaments are required to support those forces.
Method/Approach: The article looks to the tensile test results for the selected reinforcement ligament and illustrates how the elongation of the reinforcement as related to the manufactured length of the reinforcement are related so that the pressure loads are equally shared.
Conclusion: The paper concludes all of the reinforcements must be the same manufactured length for the hose reinforcement to uniformly distribute the reinforcement tension. All strand lengths in a multilayer hose must be the same length for proper load sharing.


Keywords


Hose reinforcement load sharing; Reinforcement strand tensile test

Full Text:

PDF

References


Wire Angle Response Characteristics in Hydraulic Hose. (n.d.). SAE Paper 972706




DOI: http://dx.doi.org/10.3968/10590

Refbacks

  • There are currently no refbacks.


Copyright (c) 2018 Management Science and Engineering

Creative Commons License
This work is licensed under a Creative Commons Attribution 4.0 International License.


Share us to:   


Reminder

  • How to do online submission to another Journal?
  • If you have already registered in Journal A, then how can you submit another article to Journal B? It takes two steps to make it happen:

1. Register yourself in Journal B as an Author

  • Find the journal you want to submit to in CATEGORIES, click on “VIEW JOURNAL”, “Online Submissions”, “GO TO LOGIN” and “Edit My Profile”. Check “Author” on the “Edit Profile” page, then “Save”.

2. Submission

  • Go to “User Home”, and click on “Author” under the name of Journal B. You may start a New Submission by clicking on “CLICK HERE”.


We only use three mailboxes as follows to deal with issues about paper acceptance, payment and submission of electronic versions of our journals to databases:
caooc@hotmail.com; mse@cscanada.net; mse@cscanada.org

 Articles published in Management Science and Engineering are licensed under Creative Commons Attribution 4.0 (CC-BY).

 MANAGEMENT SCIENCE AND ENGINEERING Editorial Office

Address:1055 Rue Lucien-L'Allier, Unit #772, Montreal, QC H3G 3C4, Canada.

Telephone: 1-514-558 6138
Http://www.cscanada.net Http://www.cscanada.org

Copyright © 2010 Canadian Research & Development Centre of Sciences and Cultures