A New Steam Properties Calculation Models for Horizontal Well
Abstract
During steam flows in horizontal wellbore, the mass flow rate decreases with steam draining into the formation, which causes acceleration pressure drop. Acceleration pressure drop can change steam physical parameters, wellbore pressure distribution and temperature distribution. Based on the rules of mass conservation and energy conservation, model for steam quality variation along the horizontal section was built. Pressure and temperature distribution of injected steam along horizontal section were deduced on the principle of momentum conservation. Models were solved by pressure increment iteration method. The calculation results are compared with the reservoir numerical simulator, which showed that the models in the paper were succinct and accurate.
Keywords
Full Text:
PDFReferences
Buitrago, S. (1997). Model for predicting the production rate of wells under cyclic steam injection process. SPE 39029. The Fifth latin American and Caribbean Petroleum Engineering Conference and Exhibition, Rio de Janeiro, Brazil.
Chen, Y. M. (1996). Steam injection and thermal production. Dongying, China: China University of Petroleum Press.
Dikken, B. J. (1990). Pressure drop in horizontal wells and its effect on production performance. JPT, 42(11), 1426-1433.
Escobar, E., Valko, P., & Lee, W. J. (2000). Optimization methodology for cyclic steam injection with horizontal wells. SPE 65525. International Conference on Horizontal Well Technology, Calgary, Alberta, Canada.
Ihara, M. (1992). Experimental and theoretical investigation of two-phase flows in horizontal well. SPE 24766. SPE Annual Technical Conference and Exhibition, Washington, D.C., USA.
Li, B. Z. (2003). Pressure distribution behavior of horizontal section in horizontal well. ACTA PETROLEI SINICA, 24(2), 97-100.
Wan, R. P. (1996). Oil recovery technology mannual(revised edition). Studies VIII. Heavy oil thermal recovery engineering. Beijing: Petroleum Industry Press.
DOI: http://dx.doi.org/10.3968/9455
Refbacks
- There are currently no refbacks.
Copyright (c) 2017 Jianghong JIA
This work is licensed under a Creative Commons Attribution 4.0 International License.
Share us to: 
Reminder
- How to do online submission to another Journal?
- If you have already registered in Journal A, then how can you submit another article to Journal B? It takes two steps to make it happen:
1. Register yourself in Journal B as an Author
- Find the journal you want to submit to in CATEGORIES, click on “VIEW JOURNAL”, “Online Submissions”, “GO TO LOGIN” and “Edit My Profile”. Check “Author” on the “Edit Profile” page, then “Save”.
2. Submission
- Go to “User Home”, and click on “Author” under the name of Journal B. You may start a New Submission by clicking on “CLICK HERE”.
We only use three mailboxes as follows to deal with issues about paper acceptance, payment and submission of electronic versions of our journals to databases:
caooc@hotmail.com; aped@cscanada.net; aped@cscanada.org
Articles published in Advances in Petroleum Exploration and Development are licensed under Creative Commons Attribution 4.0 (CC-BY).
ADVANCES IN PETROLEUM EXPLORATION AND DEVELOPMENT Editorial Office
Address:1055 Rue Lucien-L'Allier, Unit #772, Montreal, QC H3G 3C4, Canada.
Telephone: 1-514-558 6138
Website: Http://www.cscanada.net
Http://www.cscanada.org
E-mail:office@cscanada.net; office@cscanada.org
Copyright © 2010 Canadian Research & Development Centre of Sciences and Cultures 
