Experimental study on loss-prevention performance of oil-based drilling fluids
Abstract
Compared to the water-based drilling fluids, lost circulation is more prone to occur when drilling with oil-based drilling fluids and it is difficult to deal with this problem on the drilling site for lack of high-efficiency lost circulation materials. In order to solve this technical problem, the principles of pressure resistance plugging technology of oil-based drilling fluids was firstly investigated according to the force-chain principle of granular matter mechanics, and rigid bridging particles, elastic packing particles and micro fibers could synergistically form fracture tight sealing zones with strong force-chain network to strengthen the lost circulation prevention ability of oil-based drilling fluids. Based on the principle above, novel loss-prevention materials were finally developed for oil-based drilling fluids by optimizing different plugging agents. Experimental results show that novel loss-prevention materials could be compatible with other components of oil-based drilling fluids. The oil-based drilling fluids with high sealing capacity could be optimized by adding novel loss-prevention materials, and it exhibits good rheological behavior with a low PPT filtration of 11.4 mL and excellent lost circulation prevention ability to strengthen the wellbore while drilling.
Keywords
Full Text:
PDFReferences
Messenger, J. U. (1981). Lost circulation. Oklahoma: Pennwell Publishing Company.
Wang, Z. H. (2011). Research and application progress of oil-based drilling fluid at home and abroad. FAULT-BLOCK OIL & GAS FIELD, 18(4), 533-537.
Wang, X. G., Lin, Y. X., & Li, X. (2013). Research and application of high performance oil based drilling fluid for shale horizontal wells. PETROLEUM DRILLING TECHNIQUES, 41(2), 17-22.
Wang, H., Sweatman, R., & Engelman, B., et al. (2008). Best practice in understanding and managing lost circulation challenges. SPE 95895.
Liu, J. Y., Qiu, Z. S., & Luo, Y., et al. (2005). Experimental study on lost circulation prevention of oil-based drilling fluid. DRILLING FLUID & COMPLETION FLUID, 32(5), 10-14.
Benaissa, S., Bachelot, A., & Ricaud, J., et al. (2005). Preventing differential sticking and mud losses drilling through highly depleted sands fluids and geomechanics approach. SPE 92266.
Nayberg, T. M.. (1987). Laboratory study of lost circulation materials for use in oil-based and water-based drilling muds. SPE 14723.
Scorsone, J. T., Sanders, M. W., & Patel, A. D. (2009). An improved oil-based chemical gel system for wellbore stabilization. SPE 121676.
Guo, H., Voncken, J., & Opstal, T., et al. (2012). Investigation of the mitigation of lost circulation in oil-based drilling fluids by use of gilsonite. SPE 157751.
Onyia, E. C. (1994). Experimental data analysis of lost-circulation problems during drilling with oil-based mud. SPE 22581.
Fuh, G. F., Morita, N., & McGoffin, S. J. (1992). A new approach to preventing lost circulation while drilling. SPE 24599.
Drilling Engineering Association. (1988). Investigation of lost circulation with oil-based muds. DEA Joint Industry Project #13.
Morita, N., Black, A. D., & Fuh, G. F. (1990). Theory of lost circulation pressure. SPE 20409.
Barree, R. D. (1991). A new look at fracture-tip screen-out behavior. Journal of Petroleum Technology, 43(2).
Fuh, G. F., & Morita N. (2007). Further development, field testing, and application of the wellbore strengthening technique for drilling operations. SPE 105809.
Global Petroleum Research Institute. (2000). Lost circulation problems with synthetic based muds in deepwater flowlines. GPRI Joint Industry Project #33.
Dudley, J., Fehler, D. F., & Zeilinger, S. (2001). Minimizing lost circulation problems with synthetic muds. GPRI Project 2000 DC 3, December.
Aderibigbe, A. A., & Lane, R. H. (2013). Rock/fluid chemistry impacts on shale fracture behavior. SPE 164102.
Savari, S., Whitfill, D. L., Jamison, D. E., & Kumar, A. (2014). A method to evaluate lost circulation materials-investigation of effective wellbore strengthening applications. SPE 167977.
Mostafavi, V., Hareland, G., & Belayneh, M., et al. (2011). Experimental and mechanistic modeling of fracture sealing resistance with respect to fluid and fracture properties (pp.11-198). ARMA.
Recommended Practice. (1988). Standard procedure for field testing drilling fluids (12th, pp.7-9). Recommended Practice, 13B (RP 13B). API, Washington, USA.
Sun, Q. C., & Wang, G. Q. (2009). Introductory theory of granule matter mechanics (pp.94-99). Beijing: China Science Press.
DOI: http://dx.doi.org/10.3968/9415
Refbacks
- There are currently no refbacks.
Copyright (c) 2017 Jin-peng Chai, JUN-YI LIU, Zheng-song Qiu
This work is licensed under a Creative Commons Attribution 4.0 International License.
Share us to: 
Reminder
- How to do online submission to another Journal?
- If you have already registered in Journal A, then how can you submit another article to Journal B? It takes two steps to make it happen:
1. Register yourself in Journal B as an Author
- Find the journal you want to submit to in CATEGORIES, click on “VIEW JOURNAL”, “Online Submissions”, “GO TO LOGIN” and “Edit My Profile”. Check “Author” on the “Edit Profile” page, then “Save”.
2. Submission
- Go to “User Home”, and click on “Author” under the name of Journal B. You may start a New Submission by clicking on “CLICK HERE”.
We only use three mailboxes as follows to deal with issues about paper acceptance, payment and submission of electronic versions of our journals to databases:
caooc@hotmail.com; aped@cscanada.net; aped@cscanada.org
Articles published in Advances in Petroleum Exploration and Development are licensed under Creative Commons Attribution 4.0 (CC-BY).
ADVANCES IN PETROLEUM EXPLORATION AND DEVELOPMENT Editorial Office
Address:1055 Rue Lucien-L'Allier, Unit #772, Montreal, QC H3G 3C4, Canada.
Telephone: 1-514-558 6138
Website: Http://www.cscanada.net
Http://www.cscanada.org
E-mail:office@cscanada.net; office@cscanada.org
Copyright © 2010 Canadian Research & Development Centre of Sciences and Cultures 
