The Influence Between Natural Fracture and Hydraulic Fracture in Shale Reservoir

Yun LI, Weijia SUN, Conglian ZHANG

Abstract


Based on linear elastic fracture mechanics, the forming mechanism of complex fracture system in shale reservoir are studied. The interference of the natural fracture and hydraulic fracture model and a new crack initiation angle calculation model is established, and the influence factors of critical differential stress level and new crack initiation angle are analyzed. The impact of natural fracture dip and natural fracture density on complex fracture network are researched. Calculation results show that the lower approximation Angle and high pressure in the fracture is the necessary conditions of forming fracture network; Under the condition of lower stress difference and high internal pressure, the new crack can be faster to the maximum horizontal in-situ stress direction, connect more natural fracture; in order to get a complex fracture network in shale reservoir in the need to constantly improve the pressure to activate and connect higher approaching Angle and distance of natural fracture. The research results have important reference value in understanding the formation mechanism of complex fracture network in shale reservoir, can also be used for shale fracturing design and fracturing interval optimization.


Keywords


Shale reservoir; Fracture network; Formation mechanism; Initiation angle; Sensitive factor

Full Text:

PDF

References


[1] Guo, T. K., Zhang, S. C., & Ge, H. K. (2013). A new method for evaluating ability of forming fracture network in shale reservoir. Rock and Soil Mechanics, 34(4), 947-954.

[2] Beugelsdijk, L. J. L., Pater, C. J., & Sato, K. (2000, April). Experimental hydraulic fracture propagation in multi-fractured medium. Paper presented at SPE Asia Pacific Conference on Integrated Modelling for Asset Management, Yokohama, Japan.

[3] Fisher, M. K., Wright, C. A., Davidson, B. M., Goodwin, A. K., Fielder, E. O., Buckler, W. S., & Steinsberger, N. P. (2002). Integrating fracture mapping technologies to optimize stimulations in the Barnett shale. Paper presented at SPE Annual Technical Conference and Exhibition, San Antonio, Texas.

[4] Olson, J. E., & Taleghani, A. D. (2009, January). Modeling simulation growth of multiple hydraulic fractures and their interation with natural fracture. Paper presented at SPE Hydraulic Fracturing Technology Conference, The Woodlands, Texas.

[5] Xu, W. Y., Thiercelin, M. J., & Walton, C. (2009, October). Characterization of hydraulically-induced shale fracture using an analytical/semi-analytical model. Paper presented at SPE Annual Technical Conference and Exhibition, New Orleans, Louisiana.

[6] Weng, X. W., Kresse, O., Cohen, C. E., & Wu, R. T. (2011). Modeling of hydraulic fracture network propagation in a naturally fractured fractured formation. SPE Production & Operations, 26(4), 368-380.

[7] Rahm, D. (2011). Regulating hydraulic fracturing in shale gas plays: The case of Texas. Energy Policy, 39(5), 2974-2981.

[8] Bahorich, B., Olson, J. E., & Holder, J. (2012, October). Examining the effect of cemented natural fractures on hydraulic fracture propagation in hydrostone block experiments. Paper presented at SPE Annual Technical Conference and Exhibition, San Antonio, Texas, USA.

[9] Ding, S. D., & Sun, L. M. (1997). Fracture mechanics (pp.131-134). Beijing: China Machine Press.

[10] Wang, H. X., & Zhang, S. C. (1998). Numerical calculation methods of hydraulic fracturing (pp.302-308). Beijing: Petroleum Industry Press.




DOI: http://dx.doi.org/10.3968/8273

Refbacks

  • There are currently no refbacks.


Copyright (c) 2016 Advances in Petroleum Exploration and Development



Share us to:   

Reminder

  • How to do online submission to another Journal?
  • If you have already registered in Journal A, then how can you submit another article to Journal B? It takes two steps to make it happen:

1. Register yourself in Journal B as an Author

  • Find the journal you want to submit to in CATEGORIES, click on “VIEW JOURNAL”, “Online Submissions”, “GO TO LOGIN” and “Edit My Profile”. Check “Author” on the “Edit Profile” page, then “Save”.

2. Submission

  • Go to “User Home”, and click on “Author” under the name of Journal B. You may start a New Submission by clicking on “CLICK HERE”.

We only use three mailboxes as follows to deal with issues about paper acceptance, payment and submission of electronic versions of our journals to databases:
caooc@hotmail.com; aped@cscanada.net; aped@cscanada.org

 Articles published in Advances in Petroleum Exploration and Development are licensed under Creative Commons Attribution 4.0 (CC-BY). 

ADVANCES IN PETROLEUM EXPLORATION AND DEVELOPMENT Editorial Office

Address:1055 Rue Lucien-L'Allier, Unit #772, Montreal, QC H3G 3C4, Canada.

Telephone: 1-514-558 6138
Website: Http://www.cscanada.net
Http://www.cscanada.org
E-mail:office@cscanada.net;  office@cscanada.org

Copyright © 2010 Canadian Research & Development Centre of Sciences and Cultures