Experimental Study on the Down-Speed of Conductor Pipe Influenced by Jetting Displacement in Deepwater Drilling

Hongkun ZHANG, Yanli GUO, Zhi FAN, Mingzhao HUANG, Lingxiao WANG, Jiahui CHEN, Baojiang SUN

Abstract


Based on the theory of jet drilling technology and displacement optimization, a set of experimental equipment about jet drilling is devised. The laws of conductor pipe down-speed influenced by pump displacement were studied by laboratory experiments. According to the experimental results and analysis, the following conclusions can be drawn. The down-speed of conductor pipe increases with the increasing of displacement, also the drilling speed is boosted. But the unstableness of borehole wall is augmented as well. And this will result in the increasing of waiting time for borehole formation. In the process of conductor pipe jetting, the conductor pipe down-speed and the waiting time of soil returning to a certain bearing capacity should be considered together in order to shorten the entirety drilling time. The research can provide certain references for expensive offshore operation and have important significance to improve the economic benefits of deepwater drilling.


Keywords


Jet drilling; Conductor pipe; Down-speed; Displacement; Borehole stability; Waiting time

Full Text:

PDF

References


[1] Yang, J., Liu, S. J., Zhou, J. L., Wang, P. S., Tang, H. X., Luo, J. F.,... Zhou, C. S. (2010, June). Research of conductor setting depth using jetting in the surface of deepwater. Paper presented at International Oil and Gas Conference and Exhibition in China, Beijing, China.

[2] Beck, R. D., Jackson, C. W., & Hamilton, T. K. (1991, October). Reliable deepwater structural casing installation using controlled jetting. Paper presented at SPE Annual Technical Conference and Exhibition, Dallas, Texas.

[3] Quiros, G. W., & Little, R. L. (2003, May). Deepwater soil properties and their impact on the geotechnical program. Paper presented at Offshore Technology Conference, Houston, Texas.

[4] Akers, T. J. (2008, March). Improving hole quality and casing-running performance in riser less top holes: Deepwater Angola. Paper presented at IADC/SPE Drilling Conference, 4-6 March, Orlando, Florida, USA.

[5] Yahiro, T., & Yoshida, H. (1973). Induction grouting method utilizing high speed water jet. Proceedings of the Eighth International Conference on Soil Mechanics and Foundation Engineering, 4, 359-362.

[6] Tang, H. X., Luo, J. F., & Ye, J. H. (2011). Designing method of conductor setting depth for ultra-deepwater jetting drilling in the south China sea. Journal of Oil and Gas Technology, 33(3), 147-151.

[7] Su, K. H., Guan, Z. C., & Su, Y. A. (2008). Determination method of conductor setting depth using jetting drilling in deepwater. Journal of China University of Petroleum, 32(4), 48-50.

[8] Zhang, H., Gao, D. L., & Tang, H. X. (2010). Tubular mechanics in jetting operation of conductor under deepwater condition. Acta Petrolei Sinica, 31(3), 516-520.

[9] Events, T. G., Feyereisen, S., & Rheaume, G. (2002, November). Axial capacities of jetted well conductors in Angola. Offshore Site Investigation and Geotechnics Diversity and Sustainability’. Paper presented at Proceedings of an International Conference, London, UK.

[10] Liu, S. J., Yang, J., & Zhou, J. L. (2011). Research on relationship between weight-on-bit and drilling rate during jetting drilling in sub-bottom deepwater. Oil Drilling & Production Technology, 33(1), 12-15.

[11] Wang, S. W., Yang, J., & Yan, D. (2012). The mechanism research of surface conductor jet drilling. Journal of Oil and Gas Technology, 34(8), 157-160.

[12] Yang, J., Yan, D., & Tian, R. R. (2013). Bit stick-out calculation for the deepwater conductor jetting technique. Petroleum Exploration and Development, 40(3), 367-370.




DOI: http://dx.doi.org/10.3968/7742

Refbacks

  • There are currently no refbacks.


Copyright (c) 2016 Advances in Petroleum Exploration and Development




Share us to:   


Reminder

  • How to do online submission to another Journal?
  • If you have already registered in Journal A, then how can you submit another article to Journal B? It takes two steps to make it happen:

1. Register yourself in Journal B as an Author

  • Find the journal you want to submit to in CATEGORIES, click on “VIEW JOURNAL”, “Online Submissions”, “GO TO LOGIN” and “Edit My Profile”. Check “Author” on the “Edit Profile” page, then “Save”.

2. Submission

  • Go to “User Home”, and click on “Author” under the name of Journal B. You may start a New Submission by clicking on “CLICK HERE”.

We only use three mailboxes as follows to deal with issues about paper acceptance, payment and submission of electronic versions of our journals to databases:
caooc@hotmail.com; aped@cscanada.net; aped@cscanada.org

 Articles published in Advances in Petroleum Exploration and Development are licensed under Creative Commons Attribution 4.0 (CC-BY)

ADVANCES IN PETROLEUM EXPLORATION AND DEVELOPMENT Editorial Office

Address:1055 Rue Lucien-L'Allier, Unit #772, Montreal, QC H3G 3C4, Canada.

Telephone: 1-514-558 6138
Website: Http://www.cscanada.net
Http://www.cscanada.org
E-mail:office@cscanada.net;  office@cscanada.org

Copyright © 2010 Canadian Research & Development Centre of Sciences and Cultures