The Application of Performed Particle Gel for Water Shutoff and Flooding in Severe Heterogeneous Reservoir
Abstract
The success of in-depth fluid diversion and enhancement of the pay zones production are hot issues in long term water flooded oilfields. However, the effect of most chemical-based water cut technologies and conformance-control treatments on fluid profile conformance are normally useful surround near wellbore zones. In addition, chemical particles can probably result in formation damage on low permeable parts of pay zone and the other potential drawbacks. Comparing to general chemical agents such as cross linker, polymer gel, foam fluid and so forth. A water shutoff plugging agent called PPG (Performed Particle Gel) show its advantage in strength-control, size-control and environment-friendly. PPG is a type of gel and synthesized with aqueous, acrylamide, cross linker and the other additives, which can be prepared at surface rather than in the wellbore, thus it is not so sensitive to high temperature and high salinity. A series of studies and field experiments through core flooding were investigated in this paper. The results indicate PPG can significantly achieve in-depth conformance in sever heterogeneous formation and can be widely applied in mature water flooded oil fields.
Key words: Heterogeneous; Performed particle gel; Water shutoff; Recovery
Keywords
Full Text:
PDFReferences
[1] Bai, B. J., Li, L. X., Liu, Y. Z., Liu, H., Wang, Z. G., & You, C. M. (2007). Preformed particle gel for conformance control: factors affecting its properties and applications. SPE Reservoir Evaluation & Engineering, 10(2), 415-422.
[2] Chauveteau, G., Omari, A., Tabary, R., Renard, M., & Rose, J. (2000, April). Controlling gelation time and microgel size for water shutoff. Paper presented at SPE/DOE Improved Oil Recovery Symposium, Tulsa, Oklahoma.
[3] Wang, D., Zhao, L., & Cheng, J. (2003, October). Actual field data show that production costs of polymer flooding can be lower than water flooding. Paper presented at the SPE International Improved Oil Recovery Conference in Asia Pacific held in Kuala Lumpur, Malaysia.
[4] Smith, J. E. (1989). The transition pressure: A quick method for quantifying polyacrylamide gel strength. Paper presented at the SPE International Symposium on Oilfield Chemistry in Houston, TX, USA.
[5] Bo, P. (1998). Determination of the structure of polyacrylamride/alaminam ciIrate colloidal dispersion gel system. Chinese Journal of Chemical, 6(2), 171-173.
[6] Sydansk, R. D., & Southwell, G. P. (2000). More than 12 years’ experience with a successful conformance-control polymer-gel technology, SPE production & facilities, 15(4), 270-278.
[7] Seright, R. S., & Liang, J. (1994, April). A survey of field applications of gel treatments for water shutoff. Paper presented at SPE Latin America/Caribbean Petroleum Engineering Conference, Buenos Aires, Argentina.
[8] Gao, S. T., Li, H. B., Yang, Z. Y., Pitts, M. J., Surkalo, H., & Wyatt, K. (1996). Alkaline/surfactant/polymer pilot performance of the West Central Saertu, Daqing oil field. SPE Reservoir Engineering, 11(3), 181-188.
[9] Natarajan, D. (1998). Control of in-situ gelation for HPAM-Chromium acetate systems. Paper presented at the Improved Oil Recovery Symposium, Tulsa. OK.
[10] Song, W., Yang, C., & Han, D. (1995, November). Alkaline-surfactant-polymer combination flooding for improving recovery of the oil with high acid value. Paper presented at the International Meeting on Petroleum Engineering held in Beijing, China.
DOI: http://dx.doi.org/10.3968/6609
Refbacks
- There are currently no refbacks.
Copyright (c)
Reminder
- How to do online submission to another Journal?
- If you have already registered in Journal A, then how can you submit another article to Journal B? It takes two steps to make it happen:
1. Register yourself in Journal B as an Author
- Find the journal you want to submit to in CATEGORIES, click on “VIEW JOURNAL”, “Online Submissions”, “GO TO LOGIN” and “Edit My Profile”. Check “Author” on the “Edit Profile” page, then “Save”.
2. Submission
- Go to “User Home”, and click on “Author” under the name of Journal B. You may start a New Submission by clicking on “CLICK HERE”.
We only use three mailboxes as follows to deal with issues about paper acceptance, payment and submission of electronic versions of our journals to databases:
caooc@hotmail.com; aped@cscanada.net; aped@cscanada.org
Articles published in Advances in Petroleum Exploration and Development are licensed under Creative Commons Attribution 4.0 (CC-BY).
ADVANCES IN PETROLEUM EXPLORATION AND DEVELOPMENT Editorial Office
Address:1055 Rue Lucien-L'Allier, Unit #772, Montreal, QC H3G 3C4, Canada.
Telephone: 1-514-558 6138
Website: Http://www.cscanada.net
Http://www.cscanada.org
E-mail:office@cscanada.net; office@cscanada.org
Copyright © 2010 Canadian Research & Development Centre of Sciences and Cultures